131
Views
10
CrossRef citations to date
0
Altmetric
Research Articles

Effect of insulating layer material on RF-induced heating for external fixation system in 1.5 T MRI system

, , , &
Pages 223-227 | Received 13 Nov 2012, Accepted 01 May 2013, Published online: 19 Jun 2013

References

  • (1998). Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz). Health Phys. 74:494–522
  • ASTM International. (2011). Standard test method for measurement of radio frequency induced heating near passive implants during magnetic resonance imaging. ASTM standard F2182-11 West Conshohocken, PA: ASTM International
  • Büchler, P., Simon, A., Burger, J. (2007). Safety of active implantable devices during MRI examinations: A finite element analysis of an implantable pump. IEEE Trans. Biomed. Eng. 54:726–733
  • Jin, J. (1998). Electromagnetic Analysis and Design in Magnetic Resonance Imaging. Boca Raton, FL: CRC Press
  • Kumar, R., Lerski, R. A., Gandy, S., et al. (2009). Safety of orthopaedic implants in magnetic resonance imaging: An experimental verification. J. Orthop. Res. 24:1799–1802
  • Liu, Y., Shen, J., Kainz, W., et al. (2012a). Computational study of external fixation devices surface heating in MRI RF environment. IEEE Symposium on Electromagnetic Compatibility, Pittsburgh, August 2012
  • Liu, Y., Chen, J., Shellock, F. G., Kainz, W. (2012b). Computational and experimental studies of an orthopedic implant: MRI-related heating at 1.5-T/64-MHz and 3-T/128-MHz. J. Magn. Reson. Imaging. doi: 10.1002/jmri.23764
  • Luechinger, R., Boesiger, P., Disegi, J. A. (2007). Safety evaluation of large external fixation clamps and frames in a magnetic resonance environment. J. Biomed. Mater. Res. B Appl. Biomater. 82:17–22
  • Mattei, E., Calcagnini, G., Censi, F. (2010). Numerical model for estimating RF-induced heating on a pacemaker implant during MRI: Experimental validation. IEEE Trans. Biomed. Eng. 57:2045–2061
  • Mattei, E., Triventi, M., Calcagnini, G., et al. (2008). Complexity of MRI induced heating on metallic leads: Experimental measurements of 374 configurations. Biomed. Eng. Online. 7:11
  • Muranaka, H. (2010). Evaluation of RF heating on hip joint implant in phantom during MRI examinations. Nippon Hoshasen Gijutsu Gakkai Zasshi. 66:725–733
  • Nyenhuis, J. A., Park, S. M., Kamondetdacha, R. (2005). MRI and implanted medical devices: Basic interactions with an emphasis on heating. IEEE Trans. Device Mater. Reliab. 5:467–479
  • SEMCAD X Reference Manual. SEMCAD Simulation Platform for Electromagnetic Compatibility

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.