- Arizono T, Emoto G, Whiteside L A. (1999) Effect of malrotation on tibiofemoral articular contact pressure and kinematics with a conforming tibial articulation in total knee replacement. 45th Annual Meeting, Orthopaedic Research Society. February 1–4, 1999. Anaheim, California
- Ateshian G, Kwak S, Soslowsky L, Mow V. A. Stereophoto-grammetric method for determining in situ contact areas in diarthrodial joints, and a comparison with other methods. J Biomech 1994; 27: 111–24
- Bartel D L, Bicknell V L, Wright T M. The effect of conformity, thickness, and material on stresses in ultra-high molecular weight components for total joint replacement. J Bone Joint Surg (Am) 1986; 68: 1041–51
- Bartel D L, Rawlinson J J, Burstein A H, Ranawat C S, Flynn W F, Jr. Stresses in polyethylene components of contemporary total knee replacements. Clin Orthop 1995; 317: 76–82
- Buechel F F, Pappas M J. New Jersey low contact stress knee replacement system. Ten-year evaluation of meniscal bearings (published erratum appears in Orthop Clin North Am 1989; Oct 20 (4): preceding 519). Orthop Clin North Am 1989; 20: 147–77
- Collier J P, Mayor M B, McNamara J L. Analysis of the failure of 122 polyethylene inserts from uncemented tibial knee components. Clin Orthop 1991; 273: 232–42
- Harris M L, Morberg P, Bruce J WM., Walsh W R. An improved method for measuring tibiofemoral contact areas in total knee arthroplasty: a comparison of K-scan sensor and Fuji film. J Biomech 1999; 32: 951–8
- Matsuda S, Williams V G, Whiteside L A, White S E. A comparison of pressure-sensitive film and digital electronic sensors to measure contact area and contact stress. 41st Annual Meeting, Orthopaedic Research Society, Orlando, February 13–16, 1995, 743
- Matsuda S, White S E, Williams V G, McCarthy D S, White-Side L A. Contact stress analysis in meniscal bearing total knee arthroplasty. J Arthroplasty 1998; 13: 699–706
- McNamara J L, Collier J P, Mayor M B, Jensen R E. A comparison of contact pressures in tibial and patellar total knee components before and after service in vivo. Clin Orthop 1994; 299: 104–13
- Morra E A, Postak P D, Greenwald A S. The influence of mobile bearing knee geometry on the wear of UHMWPE tibial inserts: A finite element study. Orthopaedic Research Laboratories, Ohio 1998; 1
- Omori G, Koga Y, Bechthold J E, Gustilo R B, Nakabe N, Sasagawa K, Hara T, Takahashi H E. Contact pressure and three-dimensional tracking of unresurfaced patella in total knee arthroplasty. The Knee 1997; 4: 15–21
- Polyzoides A J, Dendrinos G K, Tsakonas H. The Rota-glide total knee arthroplasty. Prosthesis design and early results. J Arthroplasty 1996; 11: 453–9
- Snedecor G W, Cochran W G. Statistical methods. lowa State University Press, Ames, lowa 1989
- Szivek J A, Cutignola L, Volz R G. Tibiofemoral contact stress and stress distribution evaluation of total knee arthroplasties. J Arthroplasty 1995; 10: 480–91
- Szivek J A, Anderson P L, Benjamin J B. Average and peak contact stress distribution evaluation of total knee arthroplasties. J Arthroplasty 1996; 11: 952–63
- Takahashi T, Wada Y, Yamamoto H. Soft-tissue-balancing with pressure distribution during total knee arthroplasty. J Bone Joint Surg (Br) 1997; 79: 235–9
- Wallace A, Harris M, Walsh W, Bruce W. Intraoperative assessment of tibiofemoral contact stresses in total knee arthroplasty. J Arthroplasty 1998; 13: 923–7
- Wasielewski R C, Galante J O, Leighty R M, Natarajan R N, Rosenberg A G. Wear patterns on retrieved polyethylene tibial inserts and their relationship to technical considerations during total knee arthroplasty. Clin Orthop 1994; 299: 31–43
- Wright T M, Rimnac C M, Stulberg S D, Mintz L, Tsao A K, Klein R W, McCrae C. Wear of polyethylene in total joint replacements. Observations from retrieved PCA knee implants. Clin Orthop 1992; 276: 126–34
Acta Orthopaedica Scandinavica
Volume 73, 2002 - Issue 6