About this journal
Aims and scope
Being interdisciplinary in nature, this journal publishes extensive contributions in the areas of encapsulation and controlled release technologies to address innovation needs as well.
The journal will consider articles on the following:
- Encapsulation (Microencapsulation)
- Controlled Release Applications (pharmaceutical science, medicine, food technology, agriculture, energy, etc.)
- Polymeric Biomaterials
- Biomedical Polymers
- Polymeric Materials (specific to medical related applications)
The journal will consider original research articles, reviews, and book reviews. Proposals for special issues in all the above areas are welcome and should be discussed with the Editor-in-Chief in the first instance.
All submitted manuscripts are subject to initial appraisal by the Editor, and if found suitable for further consideration, will be peer-reviewed by independent and anonymous expert referees. All peer review is double anonymized.
Publishing Ethics Statement
The Journal adheres to the highest standards of publishing ethics, with rigorous processes in place to ensure this is achieved. Taylor & Francis is a member of Committee of Publication Ethics (COPE) and utilizes Similarity Check via CrossRef for all journals. More information on our ethical standards and policies can be found here: http://authorservices.taylorandfrancis.com/ethics-for-authors/.
The Journal has an appeals and complaints policy which can be viewed here: https://authorservices.taylorandfrancis.com/peer-review-appeals-and-complaints-from-authors/.
Journal metrics
Usage
- 91K annual downloads/views
Citation metrics
- 2.5 (2023) Impact Factor
- 2.6 (2023) 5 year IF
- 8.0 (2023) CiteScore (Scopus)
- Q1 CiteScore Best Quartile
- 0.650 (2023) SNIP
- 0.524 (2023) SJR
Speed/acceptance
- 13 days avg. from submission to first decision
- 66 days avg. from submission to first post-review decision
- 16 days avg. from acceptance to online publication
- 19% acceptance rate
Understanding and using journal metrics
Journal metrics can be a useful tool for readers, as well as for authors who are deciding where to submit their next manuscript for publication. However, any one metric only tells a part of the story of a journal’s quality and impact. Each metric has its limitations which means that it should never be considered in isolation, and metrics should be used to support and not replace qualitative review.
We strongly recommend that you always use a number of metrics, alongside other qualitative factors such as a journal’s aims & scope, its readership, and a review of past content published in the journal. In addition, a single article should always be assessed on its own merits and never based on the metrics of the journal it was published in.
For more details, please read the Author Services guide to understanding journal metrics.
Journal metrics in brief
Usage and acceptance rate data above are for the last full calendar year and are updated annually in February. Speed data is updated every six months, based on the prior six months. Citation metrics are updated annually mid-year. Please note that some journals do not display all of the following metrics (find out why).
- Usage: the total number of times articles in the journal were viewed by users of Taylor & Francis Online in the previous calendar year, rounded to the nearest thousand.
Citation Metrics
- Impact Factor*: the average number of citations received by articles published in the journal within a two-year window. Only journals in the Clarivate Science Citation Index Expanded (SCIE), Social Sciences Citation Index (SSCI), Arts and Humanities Citation Index (AHCI) and the Emerging Sources Citation Index (ESCI) have an Impact Factor.
- Impact Factor Best Quartile*: the journal’s highest subject category ranking in the Journal Citation Reports. Q1 = 25% of journals with the highest Impact Factors.
- 5 Year Impact Factor*: the average number of citations received by articles in the journal within a five-year window.
- CiteScore (Scopus)†: the average number of citations received by articles in the journal over a four-year period.
- CiteScore Best Quartile†: the journal’s highest CiteScore ranking in a Scopus subject category. Q1 = 25% of journals with the highest CiteScores.
- SNIP (Source Normalized Impact per Paper): the number of citations per paper in the journal, divided by citation potential in the field.
- SJR (Scimago Journal Rank): Average number of (weighted) citations in one year, divided by the number of articles published in the journal in the previous three years.
Speed/acceptance
- From submission to first decision: the average (median) number of days for a manuscript submitted to the journal to receive a first decision. Based on manuscripts receiving a first decision in the last six months.
- From submission to first post-review decision: the average (median) number of days for a manuscript submitted to the journal to receive a first decision if it is sent out for peer review. Based on manuscripts receiving a post-review first decision in the last six months.
- From acceptance to online publication: the average (median) number of days from acceptance of a manuscript to online publication of the Version of Record. Based on articles published in the last six months.
- Acceptance rate: articles accepted for publication by the journal in the previous calendar year as percentage of all papers receiving a final decision.
For more details on the data above, please read the Author Services guide to understanding journal metrics.
*Copyright: Journal Citation Reports®, Clarivate Analytics
†Copyright: CiteScore™, Scopus
Editorial board
Munmaya Mishra
ENCAPCR, LLC
Manakin Sabot, VA 23103, USA
E-mail: [email protected]
EDITORIAL ADVISORY BOARD:
Santosh Aryal - Kansas State University, USA
Gary L. Bowlin - University of Memphis, USA
Peter Dubruel - Ghent University, Belgium
Thomas Dziubla - University of Kentucky, USA
Mark W. Grinstaff - Boston University, USA
Melissa Grunlan - Texas A&M University, USA
Frank Gu - University of Waterloo, Canada
James H. Henderson - Syracuse University, USA
Jöns Hilborn - Uppsala University, Sweden
Marek Kowalczuk - Polish Academy of Sciences, Poland
Arvind Kumar - Indian Institute of Technology, Kanpur, India
Nevena Manolova - Bulgarian Academy of Sciences, Bulgaria
Ki Dong Park - Ajou University, South Korea
George D. Pins - Worcester Polytechnic, USA
Rui L. Reis - University of Minho, Portugal
Swadeshmukul Santra - University of Central Florida, USA
Molly Shoichet - University of Toronto, Canada
Andreas Taubert - University of Potsdam, Germany
Suna Timur - Ege Üniversitesi, Turkey
Wankei Wan - University of Western Ontario, Canada
Hu Yang - Virginia Commonwealth University, USA
Lei Zhai - University of Central Florida, USA
Meital Zilberman - Tel Aviv University, Israel
Herman S. Mansur - Federal University of Minas Gerais-Brazil, Brazil
Abstracting and indexing
The International Journal of Polymeric Materials and Polymeric Biomaterials is abstracted and/or indexed in:
- Chemical Abstracts Service
Chemical Abstracts (Online)
- EBSCOhost (various)
- Elsevier BV
Chimica
Compendex
Scopus
- Genamics JournalSeek
- OCLC
ArticleFirst
Electronic Collections Online
- Ovid
Inspec
- Personal Alert (Email)
- ProQuest (various)
- The Engineering Index Monthly (DVD)
- Clarivate Analytics
Science Citation Index Expanded
Web of Science
- VINITI RAN
Referativnyi Zhurnal
- World Ceramics Abstracts (Online)
Publication office: Taylor & Francis, Inc., 530 Walnut Street, Suite 850, Philadelphia, PA 19106.
Open access
International Journal of Polymeric Materials and Polymeric Biomaterials is a hybrid open access journal that is part of our Open Select publishing program, giving you the option to publish open access. Publishing open access means that your article will be free to access online immediately on publication, increasing the visibility, readership, and impact of your research.
Why choose open access?
- Increase the discoverability and readership of your article
- Make an impact and reach new readers, not just those with easy access to a research library
- Freely share your work with anyone, anywhere
- Comply with funding mandates and meet the requirements of your institution, employer or funder
- Rigorous peer review for every open access article
Article Publishing Charges (APC)
If you choose to publish open access in this journal you may be asked to pay an Article Publishing Charge (APC). You may be able to publish your article at no cost to yourself or with a reduced APC if your institution or research funder has an open access agreement or membership with Taylor & Francis.
Use our APC finder to calculate your article publishing charge
18 issues per year
Advertising information
Would you like to advertise in International Journal of Polymeric Materials and Polymeric Biomaterials?
Reach an engaged target audience and position your brand alongside authoritative peer-reviewed research by advertising in International Journal of Polymeric Materials and Polymeric Biomaterials.
Taylor & Francis make every effort to ensure the accuracy of all the information (the "Content") contained in our publications. However, Taylor & Francis, our agents (including the editor, any member of the editorial team or editorial board, and any guest editors), and our licensors, make no representations or warranties whatsoever as to the accuracy, completeness, or suitability for any purpose of the Content. Any opinions and views expressed in this publication are the opinions and views of the authors, and are not the views of or endorsed by Taylor & Francis. The accuracy of the Content should not be relied upon and should be independently verified with primary sources of information. Taylor & Francis shall not be liable for any losses, actions, claims, proceedings, demands, costs, expenses, damages, and other liabilities whatsoever or howsoever caused arising directly or indirectly in connection with, in relation to, or arising out of the use of the Content. Terms & Conditions of access and use can be found at http://www.tandfonline.com/page/terms-and-conditions .
Ready to submit?
Start a new submission or continue a submission in progress
Go to submission site (link opens in a new window) Instructions for authors