Structural Engineering International (SEI) publishes technical reports and scientific papers with a focus on structural engineering, to bridge the gap between professionals and academics. SEI is a journal with a mix of articles ranging from practical to scientific. SEI publishes articles on recent structures, developments in practice and research. Articles in SEI consider all types of structures, bridges, buildings, offshore structures, etc., constructed from all types of building materials: concrete, steel, composites, timber, fibre reinforced polymers, glass, etc. Articles in SEI also deal with the sustainability of structures and a broad range of structural engineering practice from design to construction to maintenance and monitoring, and finally to the re-use or demolition of structures.
All technical articles are reviewed by the IABSE SEI Editorial Board, with collaboration of over 250 reviewers over 20 Correspondents.
The prestigious and experienced members of our international Editorial Board will guide you from submission to publication.
Our Author Services page provides you with tips and tricks to promote your research on social media and through your network. This includes 50 free e-prints to share with anyone you wish.
Quickly and easily track the impact your paper makes with the help of My Authored Works.
Journal metrics
Usage
69K annual downloads/views
Citation metrics
1.1 (2023) Impact Factor
1.2 (2023) 5 year IF
2.6 (2023) CiteScore (Scopus)
Q2 CiteScore Best Quartile
0.895 (2023) SNIP
0.367 (2023) SJR
Speed/acceptance
28 days avg. from submission to first
decision
76 days avg. from submission to first
post-review decision
56 days avg. from acceptance to online
publication
21% acceptance rate
Understanding and using journal metrics
Journal metrics can be a useful tool for readers, as well as for authors
who are deciding where to submit their next manuscript for publication.
However, any one metric only tells a part of the story of a journal’s
quality and impact. Each metric has its limitations which means that it
should never be considered in isolation, and metrics should be used to
support and not replace qualitative review.
We strongly recommend that you always use a number of metrics, alongside
other qualitative factors such as a journal’s aims & scope, its
readership, and a review of past content published in the journal. In
addition, a single article should always be assessed on its own merits and
never based on the metrics of the journal it was published in.
Usage and acceptance rate data above are for the last full calendar year
and are updated annually in February. Speed data is updated every six
months, based on the prior six months. Citation metrics are updated
annually mid-year. Please note that some journals do not display all of
the following metrics
(find out why).
Usage:
the total number of times articles in the journal were viewed by users
of Taylor & Francis Online in the previous calendar year, rounded to the
nearest thousand.
Citation Metrics
Impact Factor*:
the average number of citations received by articles published in the
journal within a two-year window. Only journals in the Clarivate Science
Citation Index Expanded (SCIE), Social Sciences Citation Index (SSCI),
Arts and Humanities Citation Index (AHCI) and the Emerging Sources
Citation Index (ESCI) have an Impact Factor.
Impact Factor Best Quartile*:
the journal’s highest subject category ranking in the Journal Citation
Reports. Q1 = 25% of journals with the highest Impact Factors.
5 Year Impact Factor*:
the average number of citations received by articles in the journal
within a five-year window.
CiteScore (Scopus)†:
the average number of citations received by articles in the journal over
a four-year period.
CiteScore Best Quartile†:
the journal’s highest CiteScore ranking in a Scopus subject category. Q1
= 25% of journals with the highest CiteScores.
SNIP
(Source Normalized Impact per Paper):
the number of citations per paper in the journal, divided by citation
potential in the field.
SJR
(Scimago Journal Rank):
Average number of (weighted) citations in one year, divided by the
number of articles published in the journal in the previous three years.
Speed/acceptance
From submission to first decision:
the average (median) number of days for a manuscript submitted to the
journal to receive a first decision. Based on manuscripts receiving a
first decision in the last six months.
From submission to first post-review decision:
the average (median) number of days for a manuscript submitted to the
journal to receive a first decision if it is sent out for peer review.
Based on manuscripts receiving a post-review first decision in the last
six months.
From acceptance to online publication:
the average (median) number of days from acceptance of a manuscript to
online publication of the Version of Record. Based on articles published
in the last six months.
Acceptance rate:
articles accepted for publication by the journal in the previous
calendar year as percentage of all papers receiving a final decision.
Editors: Chair: Ana Mandic Ivankovic (University of Zagreb, Croatia): [email protected] Vice Chair: Eva Lantsoght (Universidad San Francisco de Quito, Ecuador): [email protected]
Editorial Board: Charles-Darwin Annan (Université Laval, Canada) Flávio de Souza Barbosa (Federal University of Juiz de Fora, Brazil) Arndt Goldack (Bergische Universität Wuppertal, Germany) Henar Martín-Sanz (Equi Bridges, Switzerland) Evangelos Katsanos (Denmark) Dongzhou Huang (Atkins, USA) Andreas Lampropoulos (University of Brighton, UK) Roman Lenner (Czech Technical University of Prague, Czech Republic) Daniele Losanno (Italy) Andrew Martin (COWI, Denmark) Laurent Rus (Singular Structures Engineering, Spain) Elsa de Sá Caetano (University of Porto, Portugal) Franziska Schmidt (Univ. of Eiffel, France) Hélder Manuel da Silva e Sousa (University of Minho, Portugal) Zhi Sun (Tongji University, China) Pierre van der Spuy Stellenbosch University, South Africa Xiaowei Wang (China) Teng Wu (University at Buffalo, USA) Takashi Yamaguchi (Osaka Metropolitan University, Japan)
Abstracting and indexing
Structural Engineering International is abstracted and indexed in:
Web of ScienceSM
Science Citation Index Expanded (SciSearch)
Journal Citation Reports/Science Edition
Current ContentsR/Engineering, Computing and Technology
CAB Abstracts database
Cambridge Scientific Abstracts under CSA Civil Engineering Abstracts
Construction and Building Abstracts (CBA)
Emerald Abstracts, International Civil Engineering Abstracts
Information Science for Physics, Electronics, and Computing (INSPEC)
Open access
Structural Engineering International is a hybrid open access journal that is part of our Open Select publishing program, giving you the option to publish open access. Publishing open access means that your article will be free to access online immediately on publication, increasing the visibility, readership, and impact of your research.
Why choose open access?
Increase the discoverability and readership of your article
Make an impact and reach new readers, not just those with easy access to a research library
Freely share your work with anyone, anywhere
Comply with funding mandates and meet the requirements of your institution, employer or funder
Rigorous peer review for every open access article
Article Publishing Charges (APC)
If you choose to publish open access in this journal you may be asked to pay an Article Publishing Charge (APC). You may be able to publish your article at no cost to yourself or with a reduced APC if your institution or research funder has an open access agreement or membership with Taylor & Francis.
International Association for Bridge and Structural Engineering (IABSE) and our publisher Taylor & Francis make every effort to ensure the accuracy of all the information (the "Content") contained in our publications. However, International Association for Bridge and Structural Engineering (IABSE) and our publisher Taylor & Francis, our agents (including the editor, any member of the editorial team or editorial board, and any guest editors), and our licensors make no representations or warranties whatsoever as to the accuracy, completeness, or suitability for any purpose of the Content. Any opinions and views expressed in this publication are the opinions and views of the authors, and are not the views of or endorsed by International Association for Bridge and Structural Engineering (IABSE) and our publisher Taylor & Francis. The accuracy of the Content should not be relied upon and should be independently verified with primary sources of information. International Association for Bridge and Structural Engineering (IABSE) and our publisher Taylor & Francis shall not be liable for any losses, actions, claims, proceedings, demands, costs, expenses, damages, and other liabilities whatsoever or howsoever caused arising directly or indirectly in connection with, in relation to, or arising out of the use of the Content. Terms & Conditions of access and use can be found at http://www.tandfonline.com/page/terms-and-conditions .
Ready to submit?
Start a new submission or continue a submission in progress
![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/110832/Subject-Sample-2021-Engineering-Tech.jpg"})