Abstract
Of the several techniques available for the surface modification, plasma processing has proved to be very appropriate. The low temperature plasma is a soft radiation source and it affects the material only over a few hundred Å deep, the bulk properties remaining unaffected. Plasma surface treatment also offers the advantage of greater chemical flexibility. PET films are widely used for packaging and electrical insulation. The studies of adhesion and printability properties are important. In the present study PET films are treated in air plasma for different time of treatment. The improvement in adhesion is studied by measuring T-peel and Lap shear strength. In addition, printability of plasma treated PET films is studied by cross test method. It has been found that printability increases considerably for plasma treatment of short duration. Therefore it is interesting to study the surface composition and morphology by contact angle measurement, ESCA and AFM. Surface energy and surface roughness can be directly correlated to the improvement in above-mentioned surface related properties. It has been found that the surface oxidation occurs containing polar functional groups such as C-O, COO. A correlation of all such observations from different techniques gives a comprehensive picture of the structure and surface composition of plasma treated PET films.