![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
Modelling and experiment work is carried out for a large stainless steel casting with variable cross-section and a curved surface which is produced by the electric slag remelting casting process. The casting is part of a hydraulic runner generator at a power station of a big river.
Mathematical models of the heat transfer and melted rate from an expendable metallic electrode were established. The melted rate is related to some important parameters, such as electric current and voltage, temperature and the flow rate of the cooling water in a crystallizer. Electrode melting, the moving pattern of the melted pool and the slag pool and the melt solidification in the metal pool were simulated.
In order to make the enmeshment of the variable curved surface of the casting, a co-operation method of extended constructive solid geometry (CSG) from 9 to 21 uniform geometry with B-Spline surface functions is developed. By this method the guide vane casting is enmeshed. The boundary condition between the steel casting and the crystallizer cooled by water was measured.
Based on the above new content the solidification simulation software ESRC3D is developed. Using it to simulate the whole process of ESRC with different parameters, instead of exploring the technological parameters of casting production by the trail-and-error method, the optimized parameters from the simulation for production of the large stainless steel castings with variable cross-section and a curved surface, such as the guide vane castings, have been used to produce them. Economic benefit and good quality of castings are obtained. Guide vane castings are widely applied to the hydraulic runner generator at numerous river power stations.