208
Views
26
CrossRef citations to date
0
Altmetric
REVIEW ARTICLE

Difficulties in the fixation of prostheses for voice rehabilitation after laryngectomy

, MD, , , , , , & show all
Pages 804-813 | Received 22 Sep 2004, Published online: 08 Jul 2009
 

Abstract

In most patients with advanced or recurrent laryngeal or hypopharyngeal cancer, total laryngectomy is indicated. This means the loss of three main functions: phonation; respiration; and the prevention of aspiration during deglutition. Laryngectomy patients have various options to restore phonation: an oesophageal voice; an electrolaryngeal voice; or a tracheo-oesophageal voice. In the last case a silicone rubber shunt valve is placed in the tracheo-oesophageal wall and phonation is generated when exhaled air is forced through the oesophagus and neopharynx. This method is widely applied in Western Europe. In this paper we review the literature on fixation problems with shunt valves, tracheostoma valves and heat and moisture exchange (HME) filters. Tracheo-oesophageal speech without a valve is not considered. Despite 22 years of experience with the implantation of tracheo-esophageal shunt valves and many improvements in the design, problems still remain, such as biofilm formation with subsequent leakage through the valve, the need for frequent and inconvenient replacements, fistula enlargement leading to leakage around the device and reduced fixation, and infections. The high cost of shunt valves is a drawback to their use worldwide. To enable hands-free speech, different types of tracheostoma valve have been developed. These valves are fixed to the skin or to the tracheostoma by means of an intra-tracheal device. An HME filter is used to protect the airway and maintain physiological balance. Such devices are only suitable for a selected group of patients as fixation to the skin or trachea can be a major problem. Speaking and coughing cause pressure increases, which often result in mucous leakage and disconnection of the valve and/or HME filter. Recommendations are made for future improvements in fixation techniques.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.