168
Views
9
CrossRef citations to date
0
Altmetric
Original Articles

Feasibility Demonstration of Electrostatic Precipitation at 1700°F

&
Pages 617-620 | Published online: 15 Mar 2012
 

Abstract

An experimental high-temperature, high-pressure electrostatic precipitator module has been designed, fabricated and then evaluated in a gaseous environment having the characteristics anticipated for the combustion chamber of a system for generating electric power from the incineration of municipal solid wastes.

Stable positive and negative corona discharges were established in combustion gases from the burning of methanol and air (temperature and pressure approximately 1700°F and 100 psig, respectively) without any apparent deleterious effects due to thermal ionization and/or emission. At gas conditions of about 1700°F and 50 psig, positive polarity energization of the discharge electrode appeared superior to that of negative polarity in terms of voltage level that could be applied and electrical stability.

However, precipitator performance on removal of alumina dust injected under controlled conditions with the methanol fuel, showed negative polarity to be superior to positive polarity at the selected conditions of 1650°F and 100 psig which closely correspond to those required for optimum operation of the gas turbine presently under consideration. Removal efficiencies ranging from 25% for positive polarity to as high as 87% with negative polarity were measured.

In order to check whether materials having a low ionization potential would thermally ionize to such an extent that the voltage-corona current characteristics of the precipitator would be impaired, rendering it ineffective, potassium chloride salt in solution was injected with the fuel. Results indicated that amounts of approximately one part by weight of potassium ion in 2500 to 3000 parts by weight of gas at 1700°F tripled the current measured for a given voltage when compared to non-injection.

Although a limited test program was conducted, sufficient data were obtained to allow preliminary design and sizing of larger scale units.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.