122
Views
21
CrossRef citations to date
0
Altmetric
Bionalytical

Quantification of Thiram in Honeybees: Development of a Chemiluminescent ELISA

, , , , , & show all
Pages 46-55 | Received 15 Sep 2007, Accepted 01 Nov 2007, Published online: 29 Jan 2008
 

Abstract

A Chemiluminescence Enzyme‐Linked Immuno‐Sorbent Assay (CL‐ELISA) for determination and quantification of the fungicide thiram in honeybees was developed in an indirect competitive format. The assay was optimized by determining: the optimal coating conjugate concentration and anti‐thiram antiserum dilution, the effect of the incubation time on the competitive step, the tolerance to organic solvents. The IC50 and the limit of detection (LOD) values were 60 ng mL−1 and 9 ng mL−1, respectively, similar to those of colorimetric ELISA with a calibration range of 9–15,000 ng mL−1. Cross reactivity of some related compounds such as some dithiocarbamates, a thiocarbamate, the ethylenethiourea and the tetramethylthiourea were tested. The assay was then applied to honeybees sample extracts obtained by using the liquid‐liquid extraction or the graphitized carbon‐based solid phase extraction.

The calibration curves in honeybee extracts from liquid‐liquid procedure gave an IC50 of 141 ng mL−1 and a LOD of 17 ng mL−1. In case of extracts obtained by SPE these values were 139 ng mL−1 and 15 ng mL−1, respectively. The average recovery value from honeybee extracts spiked with 75 ng mL−1 of thiram was 72% for SPE, higher than for liquid‐liquid extraction (60%). On the opposite, when the honeybees were directly spiked with 2 and 10 ppm the average recovery was higher for liquid‐liquid extraction (54%), than for SPE (31%). Finally, the assay was applied to honeybee samples collected during monitoring activities in Italy and Russia.

This work was supported by grant from the University of Bologna (Fundamental Oriented Research).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.