166
Views
28
CrossRef citations to date
0
Altmetric
Original Articles

Utilization of Coal Combustion Ashes for the Synthesis of Ordinary and Special Cements

, , , &
Pages 588-599 | Received 13 Mar 2009, Accepted 12 Oct 2009, Published online: 08 Jun 2010
 

Abstract

Raw mixes containing pulverized coal fly ash (with limestone and silica sand) or fluidized bed coal combustion ash (fly and bottom, with added limestone, anodization mud, and, when necessary, flue gas desulfurization gypsum), aimed at generating ordinary Portland or calcium sulfoaluminate clinkers, respectively, were heated in a laboratory electric oven at temperatures ranging from 1150° to 1500°C and submitted to X-ray diffraction analysis. The former had the same qualitative phase composition as that of a reference mixture, composed by limestone and clay; furthermore, they exhibited an excellent burnability on the basis of their residual free lime contents, measured after heating at 1350°, 1400°, 1450°, and 1500°C. The latter showed very good results in terms of conversion of reactants and selectivity degree toward the main mineralogical constituent, calcium sulfoaluminate (4CaO·3Al2O3·SO3), even if the behavior of a reference mixture consisting of limestone, bauxite, and natural gypsum was slightly better. The introduction of a fluidized bed coal combustion ash in the raw mix generating calcium sulfoaluminate clinker implies a saving of bauxite and natural gypsum, which can be fully replaced through the addition of anodization mud and flue gas desulfurization gypsum, respectively.

ACKNOWLEDGMENTS

The research activity concerning the utilization of pulverized-coal fly ash was performed under the Collaboration Agreement between CNR/DET (Consiglio Nazionale delle Ricerche/Dipartimento Energia e Trasporti) and DIFA (Dipartimento di Ingegneria e Fisica dell'Ambiente—Università degli Studi della Basilicata) within the Project “New technologies for enhancing the environmental performance of pulverized-coal fired power plants,” following the Programme Agreement MSE (Ministero dello Sviluppo Economico—CNR [Gruppo Tematico: Carbone Pulito]).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.