320
Views
17
CrossRef citations to date
0
Altmetric
Original Articles

Auto-Ignition Characteristics of Single n-Heptane Droplet in a Rapid Compression Machine

, &
Pages 912-927 | Received 02 Sep 2013, Accepted 30 Jan 2014, Published online: 02 Jun 2014
 

Abstract

The autoignition characteristics of single n-heptane droplets inside a rapid compression machine (RCM) were investigated. During the compression stroke, the temperature and pressure inside the reaction chamber both rise rapidly, and subsequently decrease after the piston reaches top dead center. When a fuel droplet experiences these transient conditions, if sufficient vaporization occurs, the droplet can autoignite. A single n-heptane droplet was placed at the center of the reaction chamber. The droplet was suspended from the tip of a 50-μm-diameter thermocouple, and its transient bulk temperature was measured. The evolution of the droplet was recorded using a high-speed charge-coupled device array camera with a frame rate of 500 fps. The initial droplet diameter was in the range of 400−1000 μm, and the compression rate was varied; compression stroke durations of 185 ms and 235 ms were investigated. The ignition delay was longer when the initial droplet diameter was larger due to the slower heating of the droplet. Ignition did not occur if the droplet exceeded a critical diameter because sufficient fuel vapor was not generated during compression. The ignition delay was shorter for the 185-ms compression stroke owing to the droplet evaporation dynamics.

FUNDING

This research was supported by a grant from the LNG Plant R&D Center funded by the Ministry of Land, Infrastructure and Transport of the Korean government.

Notes

Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/gcst.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.