300
Views
12
CrossRef citations to date
0
Altmetric
Articles

Combustion Characteristics and Emission of Briquette Fuel from Biomass Mixed with Glycerin

&
Pages 1011-1019 | Received 16 Jul 2015, Accepted 14 Dec 2015, Published online: 16 May 2016
 

ABSTRACT

This research investigates combustion characteristics and emissions of fuel briquettes made of biomass (rice husk and rice husk char) mixed with molasses and glycerin. An experiment was designed to find the best fraction of glycerin in fuel briquettes. The mixing ratios of biomass to molasses to glycerin tested are 90:10:0, 85:10:5, 80:10:10, 75:10:15, 70:10:20, and 65:10:25 by mass. Briquettes were combusted in an insulated burner in two conditions where air to fuel ratios of 16 and 24 times the stoichiometric optimal A/Fratio were used at the initial stage of combustion. During the experiment, monitored parameters were time/temperature profile, combustion rate, and emissions of gases, such as CO, CO2, NOx, and Acrolein. Combustion characteristics show that glycerin raises the combustion temperature and combustion rate by 22% and 33.7%, respectively. The exhaust gas emission test reveals that CO2 emissions are 11–15%, while the amounts of CO, NOx, and Acrolein gas are 465–1128, 37–154, and 0.1–35.3 ppm, respectively. In conclusion, the most suitable glycerin ratio in briquettes was found in the 80:10:10 mixture because it gives combustion characteristics and emissions within the health standard.

Additional information

Funding

This research project was financially supported by the Higher Education Research Promotion and National Research University Project of Thailand, Office of the Higher Education Commission, through the Biofuel Cluster of Khon Kaen University. The authors gratefully thank the Center for Alternative Energy Research and Development, Khon Kaen University, Thailand.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.