347
Views
9
CrossRef citations to date
0
Altmetric
Research Article

Effect of a Tilted Obstacle on the Flame Propagation of Gas Explosion in Case of Low Initial Pressure

, , &
Pages 2405-2422 | Received 22 Sep 2019, Accepted 05 Mar 2020, Published online: 19 Mar 2020
 

ABSTRACT

Obstacles are unavoidable in coalmine laneways and combustible gas pipeline. However, the obstacles may enhance the intensity of explosion, or change the propagation characteristic. The present paper deals with the flame propagation characteristic of explosion in the tube with a tilted obstacle (45 ~ 135°) under the condition of low initial pressure (0.2 ~ 0.35 kPa). Two models (a so-called modified model and a mathematical model) are adopted in order to describe the regularity of flame velocity for the first (i.e. after explosion at an edge of the tube) and third (i.e. before the flame reaches the end of the tube) stages, whereas some irregular phenomena are investigated during the second stage (i.e. in which the flame reaches the titled obstacle, and goes beyond it) of the whole process, i.e. explosion and flame propagation along the tube. A theoretical fitting model is built in order to describe the critical moments of the accident, i.e. explosion and propagation. It is shown that the initial pressure and obstacle, considered as governing factors, have specific influences on flameless zone and flame velocity. This research can provide a new basic study of the effects of obstacles on combustible gas explosion and a reference for actual explosion protection designs.

Nomenclature

Additional information

Funding

This work was supported by the National Key Research and Development Program of China [Grant No. 2018YFC0808500], the National Natural Science Foundation of China [Grant No. 11732003], Beijing Natural Science Foundation [Grand No. 8182050], and the cooperation program PHC Cai-Yuanpei [Grand No. 41403QJ], and the opening project of State Key Laboratory of Explosion Science and Technology (Beijing Institute of Technology) [Grant No. KFJJ18-11M].

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.