349
Views
3
CrossRef citations to date
0
Altmetric
Research Article

Modeling with WFDS Combustion Dynamics of Ornamental Vegetation Structures at WUI: Focus on the Burning of a Hedge at Laboratory Scale

, , , , , , , , ORCID Icon & show all
Pages 3181-3211 | Received 09 Mar 2021, Accepted 12 Dec 2021, Published online: 12 Jan 2022
 

ABSTRACT

This study is part of an ongoing project on modeling vegetation fires and their impacts on dwellings at wildland-urban interfaces. As a first step, fire tests were conducted at laboratory scale on both wooden wool litter and rockrose non-natural hedge. To this end, a 0.5 m x 0.5 m x 1 m hedge reconstituted from rockrose branches was burned under a Large Scale Heat Release (LSHR) apparatus. A litter of wooden wool was used before and under the hedge to mimic an ignition from an underneath burning herbaceous layer. These fire tests provided experimental data for mass loss and heat release rate, which were used as a basis for comparison with the simulations performed by using the Wildland-urban interface Fire Dynamics Simulator (WFDS). To numerically model the rockrose hedge, the distribution of the different particle classes (leaves, twigs of various diameters) was determined as well as their physicochemical properties. The comparison of the experimental data and predicted quantities showed a good agreement, whether for wooden wool burnings alone or mixed wooden wool and rockrose hedge.

Disclosure statement

No potential conflict of interest was reported by the author(s).

Nomenclature

A=

Cross sectional area of the exhaust duct (m2)

AChar=

Pre-exponential factor for char oxidation (m⋅s−1)

AH2O=

Pre-exponential factor for desiccation (K1/2⋅kg−1)

Apyr=

Pre-exponential factor for pyrolysis (s−1)

BD=

Base diameter of the branches (m)

BH=

Branch height (m)

BRD=

Diameter of the branch (m)

CFD=

Computational Fluid Dynamics

cp=

Specific heat (J/kg.K)

D=

Length scale characterizing the diameter of the pool fire (m)

dxb=

Grid cell size in the fuel bed (m)

dxg=

Grid cell size in the gas phase (m)

e=

Thickness (m)

E=

Heat release per unit mass of O2 consumed (J/kg)

EChar=

Activation energy for char oxidation (K)

EH2O=

Activation energy for desiccation (K)

Epyr=

Activation energy for pyrolysis (K)

FCD=

Drag coefficient factor (-)

FDS=

Fire Dynamic Simulator

FH=

Flame height (m)

FIGRA=

Fire growth rate index (W/s)

FkW=

Flank width (m)

FL=

Flame length (m)

g=

Gravitational acceleration (m/s2)

HRR=

Heat release rate (W)

kt=

Constant determined via a propane burner calibration (-)

kp=

Constant of the bi-directional probe (-)

L=

Length (m)

l=

width (m)

LHV=

Lower heating value (J/kg)

LSHR=

Large-Scale Heat Release apparatus

m=

Mass (kg)

MC=

Moisture content on dry basis (%)

MLR=

Mass loss rate (kg/s)

n˙O2°=

Molar flow rates of O2 in incoming air (mol/s)

n˙O2=

Molar flow rates of O2 in the exhaust duct (mol/s)

OCC=

Oxygen consumption calorimetry

PHRR=

Peak of HRR (W)

Q˙=

Volumetric heat release rate (W/m3)

RMSE=

Root-mean-square error

ROS=

Rate of spread (m/s)

T=

Temperature (K)

TGA=

Thermogravimetric analysis

tfl=

Flame residence time in the hedge (s)

tign=

Ignition time of the hedge (s)

th=

Duration of the hedge combustion (s)

tPHRR=

Time corresponding to the peak of HRR (s)

THR=

Total Heat Release (J)

V˙=

Standard flow rate in the exhaust duct (m3/s)

w=

Fuel load (kg/m2)

W=

Molecular weight (kg/mol)

WFDS=

Wildland-urban interface Fire Dynamics Simulator

X=

Mole fraction (-)

Greek symbols=
α=

Expansion factor for the fraction of the air that was depleted of its oxygen (-)

β=

Flame separation angle (°)

βchar=

Constant in char oxidation rate equation (-)

βk=

Volume fraction of the solid-phase (-)

δf=

Fuel depth (m)

δR=

Extinction length (m)

Δhc=

Heat of combustion of gases (J/kg)

Δhchar=

Heat of char oxidation (J/kg)

Δhpyr=

Heat of pyrolysis (J/kg)

Δhvap=

Heat of vaporization (J/kg)

ΔP=

Pressure drop across the bi-directional probe (Pa)

γ=

Flame tilt angle (°)

Γ=

Mass proportion of the particle class (-)

ϕ=

Oxygen depletion factor (-)

νO2,char=

Stoichiometric constant for char oxidation (-)

ρ0=

Density of dry air at 298 K and 1 atm (kg/m3)

ρbk,dry=

Bulk density (kg/m3)

ρk,dry=

Mass density of the fuel elements (kg/m3)

σ=

Surface area to volume ratio (m−1)

χAsh=

Fraction of char converted to ash (-)

χchar=

Fraction of the dry vegetation converted to char (-)

χs=

Soot emission fraction (-)

Subscript=
air=

Air

CO2=

Carbon dioxide

D=

Relative to D

dry=

Dry

δR/3=

Corresponding to δR divided by 3

δR/5=

Corresponding to δR divided by 5

H2O=

Water

k=

Fuel element

max=

Maximum

min=

Minimum

O2=

Oxygen

TK1=

Thermocouple 1 in the exhaust duct (-)

=

Ambient air

Superscript=
°=

Incoming air

a=

Ambient

Additional information

Funding

This research was supported by the projects “MED-STAR” (Strategie e misure per la mitigazione del rischio di incendio nell’area Mediterranea) and “INTERMED” (Interventions pour gérer et réduire le risque d’incendie à l’interface habitat-espace naturel) financed by the fund PC IFM 2014-2020 (http:// interreg-maritime.eu/fr/web/med-star).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.