63
Views
5
CrossRef citations to date
0
Altmetric
Original Articles

Effects Of Equivalence Ratio On the Extinction Stretch Rate Of Cylindrical Premixed Flames

&
Pages 253-263 | Received 20 Sep 1991, Accepted 09 Jul 1992, Published online: 17 Apr 2007
 

Abstract

The actual flame stretch rates of the stretched cylindrical premixed flame and counterflow twin flames were measured with LDV for the methane-air and propane-air mixtures over a wide range of equivalence ratios. The stretch rate at the flame center at the point of flame extinction was considered to be the maximum stretch rate for the existence of cylindrical and plane ftamelets. It was shown that the actual flame stretch rate at the point of flame extinction for the stretched cylindrical flame was smaller than that for the counterflow twin flames except for the case of very rich propane-air mixtures. The conditions for the existence of the cylindrical flamelet in turbulent premixed flames, which has a similarity to the fine structure of turbulent premixed flames proposed by Chomiak (1970, 1972, 1977), were discussed using the stretch rate data at the extinction point and the turbulence parameters. It was found that the cylindrical flame let could not exist in highly turbulent flames where the distributed reaction zones were realized because of the limitation of resistibility to the extinction due to local strain. Furthermore, the cylindrical flamelet should be limited to mixtures such as rich propane-air and lean methane-air in which the minimum flame diameter at the extinction point is comparable to the Kolmogorov microscale.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.