![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
ABSTRACT
In this study, the mechanical properties of single lap joints prepared by adding nanoclays with different properties into adhesives with different characteristics (toughened, flexible, paste-type, and rigid) were experimentally investigated. Single lap joints and bulk specimens were produced using DP460, DP125, Araldite 2015, and AV138 as adhesives. High-concentration hydrocarbon-doped organo-clay (HDOC-1) obtained from Çankırı, low-concentration hydrocarbon-doped organo-clay (HDOC-2) obtained from Erzurum, and organo-clay (OC) were incorporated into the adhesives as reinforcements at two different concentrations (1% and 2% wt.). The aluminum alloy AA2024-T3 was used as the adherend material. Evaluation of experiment results showed that both the characteristics of the adhesive (toughened, flexible, paste-type, and rigid) and the different forms of clays significantly influenced failure loads of the joints. Moreover, increasing or decreasing the amount of clay added into the adhesive also affected failure loads of the joints; 1% wt. reinforcement provided the best results.
Acknowledgements
The authors would like to thank TUBITAK and Erzurum Technical University for funding this project.
Funding
This research has been supported by both the Scientific and Technological Research Council of Turkey – TUBITAK [grant number 114M408] and Erzurum Technical University [grant number 2015/013].