Fundamental Understanding in Rolling Ball Tack of Tackified Block Copolymer Adhesives

Abstract

In the pressure sensitive adhesive (PSA) industry, rolling ball tack is a very common tack test, which is simple, inexpensive and easy to operate. This work attempts to search for key parameter(s), which will affect the rolling ball tack of a PSA based on a blend of styrene-isoprene-styrene triblock copolymer(SIS) and hydrocarbon tackifier(s). We want to better understand whether this particular PSA performance is controlled by the surface or bulk properties of the adhesive.

Firstly, to test the contribution from the surface properties, we employ a model system of SIS/aliphatic tackifier in 1/1 wt. ratio as the control. Part of the tackifier in this PSA is then replaced by various amounts of low molecular weight diluents with different surface tensions. The idea is to vary the surface properties of the PSA because these low surface tension and low molecular weight diluents tend to migrate to the PSA surface. It is observed that the incorporation of a lower surface tension and a lower molecular weight diluent in the PSA tends to produce a larger increase in rolling ball tack compared with the unmodified PSA. On the other hand, the incorporation of a higher surface tension and a more compatible diluent tends to produce a larger increase in loop, peel and quick stick. Each diluent lowers the shear adhesion failure temperature (SAFT) of the diluent-modified PSA. These observations are explained in terms of tackifier molecular weight, and surface tension and compatibility of the various components (polyisoprene, tackifier, diluent and oil) in the adhesive formulation.

Secondly, to test the contribution from the bulk properties, we derive an equation for rolling ball tack in terms of the bulk viscoelastic behavior of the block copolymer PSA. However, experimental values of rolling ball tack do not follow this equation. Also, with increasing tackifier concentration in SIS, rolling ball tack has very different behavior compared with loop, peel, quick stick and probe tack. The latter set of performance criteria is known to be related to PSA bulk viscoelastic behavior. Therefore, these suggest that rolling ball tack is related more to the surface properties than to the bulk properties of the adhesive based on these results and those of the diluent-modified PSA systems.

Key Words:

• Pressure sensitive adhesive
• tackifier
• block copolymer
• tack
• adhesion
• rolling ball tack
• peel strength
• loop tack
• quick stick
• probe tack
• surface tension
• viscoelasticity
• loss tangent