748
Views
4
CrossRef citations to date
0
Altmetric
Article

Recovery of neutron-irradiation-induced defects of Al2O3, Y2O3, and yttrium-aluminum garnet

ORCID Icon, , , & ORCID Icon
Pages 891-898 | Received 13 Oct 2016, Accepted 21 Apr 2017, Published online: 10 May 2017
 

ABSTRACT

SiC fiber-reinforced SiC matrix composites (SiCf/SiC) are considered as one of the candidates for blanket materials in future fusion reactors and as an advanced fuel cladding material for next-generation fission reactors. Generally, the densification of SiC needs sintering additives and oxides such as Al2O3, Y2O3, and yttrium-aluminum garnet (YAG, Y3Al5O12), which are frequently added to SiC. However, the effects of neutron irradiation on sintering additives are still unclear. In this study, we performed the neutron irradiation of Al2O3, Y2O3, and YAG at fluences up to 2.0–2.5 × 1024 n/m2 (E > 0.1 MeV) at 60–90 °C. The isochronal recovery of the macroscopic volume of Al2O3 against annealing temperature showed smooth and continuous shrinkage at a temperature of up to 1200 °C, and the volume slightly increased above that temperature. In contrast, the volume of Y2O3 showed quick shrinkage at the low temperature range, and slower and smooth recovery was observed up to ∼1100 °C. In the case of YAG, the recovery of volume occurred in a step-wise manner at 600–750 °C, and continuous shrinkage occurred at temperatures lower and higher than that temperature range. The activation energies for the macroscopic volume recoveries of three oxides were obtained from the Arrhenius plots of the rate coefficients. Two-stage recovery was observed for Al2O3, whereas more complicated recovery processes were suggested for Y2O3 and YAG.

Acknowledgments

The study was partly supported by a Grant-in-Aid for Scientific Research from the Japan Society for Promotion of Science (Grant Number :23360424) and by the Japan Atomic Energy Agency through ITER-BA activity. The irradiation experiments were performed with support from the staff of the International Research Center for Nuclear Materials Science, Institute for Materials Research, Tohoku University.

Disclosure statement

No potential conflict of interest was reported by the authors.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.