2
Views
3
CrossRef citations to date
0
Altmetric
Original Articles

Lead Iodide Emulsion Photosystem

&
Pages 193-201 | Received 10 Aug 1972, Published online: 23 Jul 2016
 

Abstract

Precipitated microcrystals of lead iodide were suspended in such binders as gelatin or polyvinyl alcohol and coated. An image may be printed out at 100° C with a strong light incandescent light, and stabilized with any of a number of complexing agents. Contrast is reduced by stabilization, but this may be minimized by using a web processing method. Spectralsensitivity measurements agreed well with those of Tubbs on the photoconductivity of single crystals. Variations in the emulsion formulation were studied with respect to their effects on photolytic response, on the temperature dependence of the response and on resolving power. Typical formulations are given. One variation gives a coating which is insensitive until thermally “ripened”. A survey of the prior art is included. 39 references.

Abrégé

Des microcristaux d’iodure de plomb précipités ont été dispersés dans des liants tels que la gélatine ou l’alcohol polyvinylique. Par noircissement direct à 100° C avec une lampe à incandescence puissante, il se forme une image qui peut être stabilisée par certains agents complexants. Le contraste est diminué par la stabilization, mais cette diminution peut être minimisée en utilisant une méthode de traitement en continu. Les mesures de sensibilité spectrale sont en bon accord avec celles de TUBBS sur la photoconductibilité de monocristaux. Des variantes de la technique de préparation de l’émulsion ont été étudiées en ce qui concerne leurs effets sur la réponse photolytique, sur l’influence de la températûre sur la sensibilité et sur le pouvoir de résolution. Des formules types sont données. L’une d’elles fournit un couchage qui n’est pas sensible tant qu’il n’a pas subi un traitement thermique.

Revue des antériorités (39 références).

Zusammenfassung

Durch Fällung hergestellte Bleijodid-Mikrokristalle wurden in Bindemitteln wie Gelatine oder Polyvinylalkohol suspendiert und als Schichten vergossen. Bei 100° C läßt sich auf derartigen Schichten bei Exposition mit starken Glöhlampenlicht ein photolytisches Bild erzeugen, das durch eine Reihe von Komplexbildnern stabilisiert werden kann.

Messungen der spektralen Sensibilisierung stimmten gut mit denen von Tubbs öber die Photoleitfähigkeit von Einkristallen öberein.

Variationen im Emulsionsrezept wurden untersucht auf ihre Wirkung bezöglich photolytischer Empfindlichkeit, Temperaturverhalten der Empfindlichkeit und Auflösungsvermögen. Typische Rezepturen werden mitgeteilt. Eine davon liefert eine Schicht, die vollkommen lichtunempfindlich ist, wenn sie nicht vorher thermisch “gereift” wird. Mit 39 Literaturhinweisen wird ein öberblick öber den bisher auf diesem Gebiet erreichten Stand der Technik gegeben.

Riassunto

Dei microcristalli di ioduro di piombo precipitati, sono stati sospesi in mezzi portanti qua li gelatina o polivinilalcool. Una immagine può essere stampata a 100° C con una forte lampada ad incandescenza e stabilizzata con vari agenti complessanti.

Il contrasto viene ridotto mediante stabilizzazione, ma questo può essere minimizzato usando un metodo.

La misura della sensibilità spettrale è in accordo con quella di Tubbs sulla fotoconduttività di cristalli singoli.

Variazioni sulla formulazione di emulsioni sono state studiate, con particolare riguardo ai loro effetti sulla risposta fotolitica, sulla dipen denza dalla temperatura del risultato e sul potere risolutivo.

Sono date alcune formulazioni tipiche. Una variazione dà delle stese che sono insensibili sino a che non sono state “maturate” termicamente.

E’ anche data una ricerca sulla “prior art”. (39 referenze).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.