Benchmarking Neutron Counting System for Passive Measurements and Active Interrogation of Unknown Objects for Fissile and Fissionable Materials Determination

Abstract

The low rate at which some fissile isotopes, such as ²³⁵U, ²³³U, and ²³⁹Pu, undergo spontaneous fission leads to a weak signal, resulting in a high-uncertainty in applying passive neutron counting techniques. Stimulating fission through active neutron interrogation can overcome this issue. At Canadian Nuclear Laboratories, a ²⁵²Cf and a deuterium-deuterium neutron source are available. In this study, a neutron counting system was designed to perform passive measurements and active neutron interrogation for a search of special nuclear material. The detection system consists of a cylindrical cavity surrounded by a polyethylene moderator with ³He detectors interspersed throughout. When used for passive measurements, the sample is placed in the cylindrical cavity, whereas in active interrogation mode, the ²⁵²Cf neutron source and the sample are placed in close proximity to each other in the cylindrical cavity. Measurements that actively interrogated samples, notably containing (among other isotopes) either ²³⁵U or ²³⁹Pu whose mass was on the order of fractions of a gram, carried out using the ²⁵²Cf neutron source found that the average delayed neutron count rate was on the same order of magnitude as those obtained from passive measurements using several kilograms of natural uranium. The Monte Carlo N-Particle 6 version 2.0 radiation transport code was used to simulate the aforementioned active interrogations and to inform the experimental results. Results showed that, due to the close proximity of the polyethylene moderator to the ²⁵²Cf source, the neutron energy spectrum traversing the fissile sample has a significant thermal component that maximizes the fission reaction rate in the interrogated fissile samples, thereby allowing for successful measurements.

Keywords:

• Active neutron interrogation
• delayed neutrons
• MCNP6
• uranium-235

Acknowledgments

This work was supported by the Atomic Energy of Canada Limited’s Federal Nuclear Science and Technology Work Plan. This research made use of the resources of the High Performance Computing Centre at CNL. The authors would like to thank J. Wegner for carrying out gamma-ray dose rate measurements from the samples discussed in this work.

Disclosure Statement

The authors declare no conflict of interest.

Correction Statement

This article has been corrected with minor changes. These changes do not impact the academic content of the article.