![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
The failure of sintered steels differs from the behaviour of wrought steels because of factors such as porosity, remnants of previous particle surfaces and generally more complex microstructures. All these factors influence initiation, growth and propagation of microcracks when the sintered microstructure is mechanically loaded. Fracture paths and fracture resistance are shown to be related to details of the microstructures comprising ferrite, austenite, bainite, martensite, pores and weak interfaces. All these have characteristic fracture resistance properties resulting in, frequently combinations of, dimple rupture, cleavage, intergranular and interparticle failure micromechanisms. Results are presented of systematic studies, enabling identification of relevant stresses, in static and dynamic three-point loading, as the cracking process progresses. In static loading, microcracking has been detected in some steels below the macroscopic yield stress and in the first 100 cycles in fatigue. Microcracks nucleate, grow and coalesce, in a step-wise manner, before achieving a catastrophic size – for which conventional fracture mechanics holds. Thus, application of Paris-type analysis to Stage II fatigue is therefore inappropriate. The review focuses on failure micromechanisms and interpretation of fracture surface composition of sintered steels, particularly of those based on Distaloy AE and Astaloy CrL powders. The relationships between microstructure and mechanical properties are discussed.
Acknowledgements
The authors wish to thank the Slovak National Grant Agency (Project VEGA 2/0052/14 and VEGA 2/0100/15) for financial support of this work. The authors acknowledge the professional assistance of Prof. A. S.Wronski in the preparation of this manuscript.