23
Views
23
CrossRef citations to date
0
Altmetric
Original Articles

Anisotropic emission in single crystal sputtering measurements on HCP single crystals

Pages 263-270 | Received 01 Jan 1973, Accepted 12 Feb 1973, Published online: 12 Sep 2006
 

Abstract

The ejection characteristics of single crystals of zinc, magnesium (hcp) and aluminum (fcc) were determined by bombarding various crystal surfaces with a beam of inert gas ions. The energy of the bombarding ions varied between 10 and 40 keV. The sputtered particles were collected on cooled, hemicylindrical metal collectors; with the help of an electron probe the thickness of the deposit was measured. Pronounced anisotropic emission was observed in all cases, although random emission comprises the major part of the total ejection. By comparing the 〈2023〉 ejection, which is produced by pure surface collisions, and the 〈1120〉 ejection, where focusing collisions are involved, we deduce that surface collisions are mainly responsible for the anisotropic emission. The width of both emission distributions increases linearly to the same extent in the temperature regime between 100 and 370 K. The agreement of the Mg 〈1120〉 ejection with the 〈110〉 ejection from an aluminum (111) single crystal is good and thus allows a comparison with the gold 〈110〉 ejection reported in the literature.

The assisted focusing ejection in 〈0001〉, which is very pronounced in zinc single crystals and strongly influences the 〈2023〉 ejection from the basal plane, does not show up in magnesium. No 〈111〉 ejection occurred in aluminum either. In both cases the weak repulsive potential of the low-Z atoms accounts for the lack of this preferential emission.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.