Potential application of liquid dye penetrants for serial number restoration on firearms

Abstract

Chemical reagents for serial number restoration are designed to exploit the plastic deformation zone below the obliterated serial number. Most techniques in operational use are variants of Fry’s Reagent. This technique uses toxic, corrosive chemicals and requires a skilful operator in the laboratory. Fry’s Reagent can also be destructive of the firearm due to rusting. In an attempt to find a non-toxic, non-destructive alternative to Fry’s Reagent, this project tested the use of liquid dye penetrants (LDPs), a non-destructive examination technique to detect cracks and imperfections used in the welding industry, for the restoration of obliterated serial numbers. Steel plates bearing an obliterated serial number with a range of obliteration depths were subjected to LDP treatment under various treatment conditions. The results using LDPs were negative for all obliteration depths and all test conditions attempted. Some of the serial numbers were subsequently restored successfully with Fry’s reagent, proving that the plastic deformation zone was present on the steel plates below the obliteration. Further work to develop a non-toxic, non-destructive serial number restoration process will be undertaken.

Keywords:

• Firearms
• serial number restoration
• Fry’s reagent
• chemical etching
• liquid dye penetrants

Acknowledgements

The NSW Police Forensic Services Group – Forensic ballistics investigation section collaborated with the authors on this project. They assisted with the creation of the serial numbers and with their obliteration.