![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
Abstract
A series of silica-supported nickel catalyst precursors was synthesized with different SiO2/Ni molar ratios. Reduction of Ni catalyst precursors with different SiO2/Ni molar ratios under a hydrogen atmosphere was investigated at different heating rates. Kinetic parameters were determined using Kissinger–Akahira–Sunose isoconversional and invariant kinetic parameter methods. It was found that for all molar ratios, the apparent activation energy (Ea) is practically constant in the conversion range of 0.20 ≤ α ≤ 0.80. In the considered conversion range, following values of Ea were found: 134.5 kJ mol−1 (SiO2/Ni = 0.20), 139.6 kJ mol−1 (SiO2/Ni = 0.80), and 128.3 kJ mol−1 (SiO2/Ni = 1.15). It was established that the reduction of Ni catalyst precursors with different SiO2/Ni molar ratios is a complex process and can be described by the Šesták–Berggren autocatalytic model. It was found that the reaction is more Langmuir–Hinshelwood type, as hydrogen dissociates rapidly on surface nuclei and the dissociated hydrogen reacts with the Ni–O active system. It was concluded that the reduction process proceeds through bulk nucleation, which is a dominant mechanism, where three-dimensional growth of crystals with polyhedron-like morphology exists. It was found that the Ni/Si ratio decreases after the reduction process. This has been explained by low Ni and higher Si surface concentrations. It has been disclosed that Ni dispersion decreases.