THE GROWTH OF CAVERNS FORMED AROUND ROTATING IMPELLERS DURING THE MIXING OF A YIELD STRESS FLUID

Abstract

The growth of caverns, formed around rotating impellers in a yield stress fluid during mixing in a stirred vessel, has been studied by observing impeller speeds at which fluid motion was first observed at the vessel's wall and base, and at the free liquid surface. The effect of impeller geometry has been studied with a disk turbine (DT), a two bladed paddle (2BP), a pitched blade turbine (PBT) and a marine propeller (MP).

The presence of four baffles (10%) was found to increase the impeller speed at which the cavern reaches the vessel wall by 9% on average over that observed without baffles. After the cavern has reached the vessel walls, impeller type had a small effect upon the vertical expansion of the cavern with increasing impeller speed. Radial flow impellers (DT and 2BP), on average, performed better than an axial flow impeller (MP), with a mixed flow impeller (PBT) in between. Baffles significantly reduce the rate of this vertical expansion of the cavern. Clearance of the impeller from the vessel base had little effect upon the growth of the cavern above the impeller.

KEYWORDS:

• Mixing
• Rotating impellers
• Caverns
• Yield stress