EFFECTS OF PARTICLE CHARACTERISTICS ON THE PERFORMANCE OF A FAST FLUIDIZED BED REACTOR

Abstract

A heterogeneous model for the fast fluidized bed reactor which carries out a gas-solid non catalytic reaction is presented. The hydrodynamics of the fast fluidized bed is characterized by the model of Kwauk et al. (1985) which assumes the existence of two phases; a dense phase and a dilute pneumatic transport phase. For a given solid flowrate, the length of the reactor occupied by each phase depends on gas velocity, particle diameter and density and average voidage within the reactor. The gas-solid reaction is assumed to follow the shrinking core model. The solids are assumed to be completely backmixed in the dense phase and move in plug How in the dilute pneumatic transport phase. The gas phase is assumed to be in plug flow in both phases

For given gas and solid flowrates, the transition from the dense phase flow to the fast fluidized bed (containing two regions) as functions of particle size and density is determined using the model of Kwauk et al. (1985). The numerical solution of the governing mass balance equations show that for given solid and gas flowrates, (and average voidage) the gas phase conversion shows an unusual behavior with respect to particle diameter and density. Such behavior is resulted from the effects of particle diameter and density on the reactor volume occupied by each phase and the effect of particle diameter on the apparent reaction rate. The numerical results show that a fast fluidized bed gives the best conversion at large particle density and for the particle diameter which results the fast fluidized bed to be operated near the pure dense phase flow.

KEYWORDS:

• Fast fluidized bed
• Gas-solid reactor
• Particle characteristics
• Short contact time
• Reactor model
• Pneumatic flow