Numerical Simulation of Pressure Effects on the Gasification of Australian and Indian Coals in a Tubular Gasifier

Abstract

This article presents a numerical study on the effect of pressure on the gasification performance of an entrained flow tubular gasifier for Australian and Indian coals. Gasification using a substoichiometric amount of air, with or without steam addition, is considered. The model takes into account phenomena such as devolatilization, combustion of volatiles, char combustion, and gasification. Continuous-phase conservation equations are solved in an Eulerian frame and those of the particle phase are solved in a Lagrangian frame, with coupling between the two phases carried out through interactive source terms. The numerical results obtained show that the gasification performance increases for both types of coal when the pressure is increased. Locations of devolatilization, combustion, and gasification zones inside the gasifier are analyzed using the temperature plots, devolatilization plots, and mass depletion histories of coal particles. With increase in pressure, the temperature inside the gasifier increases and also the position of maximum temperature shifts upstream. For the high-ash Indian coal, the combustion of volatiles and char and the gasification process are relatively slower than those for the low-ash Australian coal. The mole fractions of CO and H₂ are found to increase with increase in pressure, in all the cases considered. Further, the effects of pressure on overall gasification performance parameters such as carbon conversion, product gas heating value, and cold gas efficiency are also discussed for both types of coals.