Phased Array of Phased Arrays (PAPA) Laser Systems Architecture

Abstract

This paper introduces and analyzes revolutionary laser system architecture capable of dramatically reducing the complexity of laser systems while simultaneously increasing capability. The architecture includes three major subsystems. The first is a phased array of laser sources. In this article, we discuss diode-pumped fiber lasers as the elements of the phased array, although other waveguide lasers can also be considered. The second provides wavefront control and electronics beam steering, as described in an IEEE Proceedings article on “Optical Phased Array Technology” [1]. The third is subaperture receiver technology. Combining these three technologies into a new laser systems architecture results in a system that has graceful degradation, can steer to as wide an angle as individual optical phased array subapertures, and can be scaled to high power and large apertures through phasing of a number of subapertures. Diode-pumped fiber lasers are appealing as laser sources because they are electrically pumped, efficient, relatively simple, and scalable to significant power levels (over 100 Watts has been demonstrated from a single diode-pumped fiber laser) [2]. The fiber laser design also lends itself to integration into a phased array. Fiber lasers have been phased. Initial phasing demonstrations have been at low power and were conducted by taking a single source, dividing it into multiple fibers, then phasing them together. To develop this technology further we need to use independent fiber lasers or fiber amplifiers, seeded by a common source, and to increase laser power. As we increase laser power, we will have to learn to cope with nonlinearities in the laser amplifiers. Optical Phased Array technology has demonstrated steering over a 90-degree field of regard [4], although this approach used additional optical components. If we use straightforward optical phased array beam steering without additional optics we can steer with high efficiency to about one-third λ/d, where d is the smallest individually addressable element. The one-third factor depends on the efficiency threshold. For example, if we use 1.5 μm light, and 5 μm center-to-center spacing, we can steer with high efficiency to about ±6 degrees, or a field of regard of 12 degrees. Last, we need to develop a subaperture receive technology. This can be a pupil plane receiver, an image plane receiver, or some combination of the approaches. When we have matured each individual technology and combined them into new laser systems architectures, we will have the ability to build simpler and more capable laser systems. The vision for an integrated, phased array laser concept is to enable a new class of laser systems with significant advantages, including high-efficiency, all-electric laser source; all waveguide beam transport; wavefront control at the sub-aperture level (enabling wavefront compensation, conformal apertures, and wide-angle electronic beam steering); random access beam pointing over wide angles; multiple simultaneous beam generation and control; and graceful degradation.

Keywords:

• optical phased arrays
• phased arrays
• electronic beam steering
• spatial light modulators
• fiber lasers
• supaperative receive
• sparse aperatures