Acoustic imagery using a multibeam bathymetric system

Abstract

Historically, measurement and collection of deep‐ocean acoustic imagery are accomplished by towed sidescan systems. Recently, work has been performed to extract acoustic imagery from current hull‐mounted wide‐swath bathymetric sonars with minimal hardware modification. Past work of deriving acoustic imagery from swath sonars has been performed primarily with SeaBeam's sixteen 2^2/3 ° preformed beams. The Navy is investigating the feasibility of extracting an acoustic image from the Sonar Array Survey Systems (SASS), a high‐resolution (1^o beams) wide‐fan (90°) bathymetric system. Due to the large data volume (approximately 1 MB per ping), SASS normally discards the raw acoustic returns once bathymetry is calculated. In early 1991 the Naval Air Development Center (NADC) installed the hardware on board the USNS Maury to capture and record the raw acoustic signal (inphase and quadrature) from the SASS's 144 hydrophones for later inversion to a backscatter image. Preliminary qualitative mosaics of the sidescan images show promising results and warrant further development.

Keywords:

• bathymetry
• multibeam bathymetric systems
• towed imaging systems
• image processing