Abstract
The demineralization of water by membrane distillation (MD) has been investigated. In the first stage of investigations the tap water or boiled tap water was employed as a feed, and the water recovery coefficient exceeding 75% was achieved. The obtained concentrate was supplied to the second stage of MD installation. The quality of distillate was stable and practically independent of the feed concentration. The produced distillate has the electrical conductivity in the range of 1.4–2.5 µS/cm. The precipitation of salt deposit on the membrane surface was observed during the water demineralisation, especially in the first stage of MD. The membrane morphology and the composition of precipitate layer were studied using scanning electron microscopy coupled with energy dispersion spectrometry. The formed deposit caused clogging of the membrane surface (pores), and resulted in a gradual decline of the module efficiency. Moreover, the formation of the deposit on the membrane surface was the major reason of the partial membrane wettability.