![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
This work focuses on the treatment of oily wastewater using the cross-flow microfiltration (MF) process to determine the effect of different operating parameters such as transmembrane pressure (TMP) and cross-flow velocity on the separation performance and to study the mechanism of membrane fouling during microfiltration of oil in water emulsions. In this regard, the permeation flux and oil rejection of a polyvinylidene fluoride (PVDF) membrane in a flat-frame MF module for separation of 3000 ppm oil/water emulsions were measured. The results indicated that the permeate flux increased by an enhancement in both TMP and cross-flow velocity, while the oil rejection decreased. The analysis of variance (ANOVA) showed that the individual effect of TMP and cross-flow velocity is more important than the interactional effect of these operating parameters on the permeate flux and oil rejection. The results of fouling modeling revealed that the membrane fouling mechanism was affected by the applied TMP. The cake filtration model dominates the fouling mechanism at lower operating pressures. The fouling mechanism was changed from the cake formation to intermediate pore blocking and then to standard pore blocking as the TMP varied from 1 to 3 bar. Finally, a five-step procedure was used for cleaning the oil/water fouled membranes.