337
Views
14
CrossRef citations to date
0
Altmetric
Membranes

Microfiltration of Synthetic Bacteria Solution Using Low Cost Ceramic Membranes

, , &
Pages 121-135 | Received 17 Jan 2014, Accepted 26 Jul 2014, Published online: 25 Sep 2014
 

Abstract

This work addresses the development and identification of optimal low cost membrane morphologies for bacteria separation applications. Using uniaxial dry compaction method, ceramic membranes (CM1–CM3) were prepared using kaolin, quartz, calcium carbonate, sodium carbonate, boric acid, sodium metasilicate, and poly-vinyl alcohol (PVA) precursors. The fabricated membranes possessed diverse pore morphologies (0.7-4.5 μm average pore size and 39.4–19.3% porosity). Amongst all membranes, the CM3 membrane with wide pore morphology (average pore size of 4.5 μm and porosity of 19.3%) provided the best performance during the direct-flow MF of synthetic Escherichia coli (DH5α strain) solutions. The CM3 membrane provided a trans-membrane flux varying from 1.21 × 10− 2 –3.51 × 10−3 m3/m2.s after 10 minutes of direct-flow MF for a variation in feed concentrations of 0.004 –14.9 × 106 CFU/mL. Corresponding bacterial removal efficiency and log10 reduction value (LRV) values varied from 99-99.9999% and 2-6 respectively. Further, various fouling models have been evaluated for their use in measuring flux decline data. The results indicated that both membrane pore morphologies and concentration of E. coli strains significantly influenced the measured transmembrane flux, fouling index, and separation efficiency.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.