121
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

Demonstration of the Use of Formohydroxamic Acid in the UREX Process

&
Pages 2823-2831 | Received 14 Nov 2014, Accepted 18 Aug 2015, Published online: 08 Jan 2016
 

Abstract

The Uranium Extraction (UREX) process was developed to separate U and Tc from the transuranic elements and the remaining fission products. To prevent the extraction of Np and Pu, a dilute nitric acid scrub stream containing acetohydroxamic acid (AHA) is used in the process. When the AHA contacts nitric acid, the complexant begins to decompose producing acetic acid and hydroxylamine nitrate (HAN). The HAN decomposes to gaseous products and water; however, the acetic acid is relatively stable and will contaminate nitric acid recovered from waste streams. To address this issue, formohydroxamic acid (FHA) was evaluated as a replacement for AHA. Formohydroxamic acid prevents the extraction of Np and Pu and its decomposition products (formic acid and HAN) readily decompose. Neptunium and Pu distribution coefficient measurements demonstrated that FHA was an acceptable replacement for AHA. Additional extraction experiments performed with the addition of uranyl nitrate to the aqueous phase showed that its presence had little effect on the distribution coefficients. A steady increase in distribution coefficients with increasing nitrate concentrations was consistent with a salting-out effect. When the actinides were back-extracted into the aqueous phase, the Np and Pu distribution coefficients were larger than the distribution coefficients measured in an extraction mode potentially due to kinetic limitations. These data imply that a greater number of scrub stages would be required in the first bank of the UREX process contactors than would be calculated based on the Pu and Np distribution data generated in the extraction experiments.

Additional information

Funding

The work was supported by Funding Opportunity Announcement (FOA) number DE-PS07-08ID14906 sponsored by the US Department of Energy’s Office of Nuclear Energy. The Savannah River National Laboratory is operated by Savannah River Nuclear Solutions under contract number DE-AC09-08SR22470.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.