![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
ABSTRACT
In the process of iron ore beneficiation, a considerable amount of iron was lost to the tailings, resulting in the waste of resources and environmental pollution. In this study, an innovative technology of pre-concentration followed by suspension magnetization roasting and low-intensity magnetic separation (PSRM) was used to recover iron from iron tailings. The iron grade of the roasted feed ores was increased from 15.68% to 33.19% by pre-concentration process. Subsequently, the suspension magnetization roasting was performed to transform the weak magnetic minerals into magnetite, and magnetite concentrate was obtained via low-intensity magnetic separation. The effects of feeding rate, roasting temperature, reducing gas CO flow rate, and fluidizing gas N2 flow rate during suspension magnetization roasting were investigated, and the pilot-scale equipment was conducted for 72 h continuously under the optimum roasting conditions. The phase transformation and magnetic property variations of the minerals before and after roasting were analyzed by X-ray diffractometer (XRD) and vibrating sample magnetometer (VSM), respectively. The results showed that an iron concentrate with iron grade of 63.04% and total iron recovery of 48.40% was obtained under the optimum roasting conditions: feeding rate of 111.70 kg/h, roasting temperature of 550°C, CO flow rate of 4.0 m3/h, and N2 flow rate of 2.0 m3/h. The hematite and siderite in tailings were transformed into magnetite with an average magnetic conversion rate of 86.46%. This innovative PSRM technology provides an important reference for the resource utilization of solid waste and the recovery of iron from iron tailings.
Acknowledgments
The authors are grateful for the financial support provided to this project by the National Science Foundation of China (Grant No. 51734005)
Disclosure statement
No potential conflict of interest was reported by the authors.