79
Views
3
CrossRef citations to date
0
Altmetric
Articles

Compatibility of silorane composite repaired with methacrylate-based restorative systems

, , , &
Pages 1579-1591 | Received 18 Dec 2013, Accepted 14 Mar 2014, Published online: 08 Apr 2014
 

Abstract

The aim of this study was to evaluate the repair bond strength of silorane composites using either the silorane or methacrylate-based restorative systems. Expired silorane composite was used as the substrate material in all experimental groups. Silorane blocks (5 × 5 × 4 mm) were fabricated and stored at 37 °C for 24 h. Six experimental groups were developed according to the repair: I-silorane composite (no intermediary); II-P90 Bond/Silorane; III-P90 Adhesive System (primer/bond)/silorane; IV-P90 bond/Scotchbond Universal/methacrylate composite (Filtek P60); V-Scotchbond Universal/methacrylate; and VI-silane/Adper Single Bond 2/methacrylate. The repaired blocks were stored for 24 h at 37 °C, and then sectioned, yielding stick-shaped specimens (0.5 mm2) that were tested in tensile (0.5 mm/min). The results were analyzed using ANOVA/Tukey test (α = 0.05). The interfacial micromorphology and nanoleakage were also analyzed under SEM. Scotchbond Universal/methacrylate composite, either associated with the P90 bond or not, exhibited similar bond strength to that of P90 Adhesive System/silorane composite. Scotchbond Universal either associated with the P90 Bond or not to repair the silorane allowed no pre-testing failures. The worst scenarios were repairing the silorane with no intermediary (G-I) or combination silane/Adper Single Bond 2/methacrylate composite (G-VI) that presented significantly lower bond strengths and higher incidences of pre-failure testing. The importance of the silane was not confirmed. Characteristic micromorphology and no signs of nanoleakage were identified in all experimental groups. The silane-containing, phosphorylated methacrylate-based adhesive associated with a methacrylate composite was proven to reliably repair the expired composite in a similar way to that of the application of dedicated silorane adhesive.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.