https://orcid.org/0000-0001-8169-2528
![Sample our Physical Sciences journals, sign in here to start your FREE access for 14 days]({"type":"image" , "src" : "/sda/110819/TOC-Subject-Sample-2021-Physical-Sciences.jpg"})
Abstract
This study evaluated the effect of pre-heating a dual-polymerized adhesive and a dual-polymerized core build-up resin composite on their dentin micro-shear bond strength (µSBS), degree of conversion (DC%) and ultimate tensile strength (UTS). For µSBS, 45 human molars were divided into 9 groups (n = 5) according to two factors: (1) Adhesive temperature (25 °C/32 °C/40 °C) and 2- Resin composite temperature (25 °C/32 °C/40 °C). Dual-polymerized adhesive (Futurabond U/FBU) was applied over occlusal dentin at each temperature following the manufacturer’s instructions. Four dual-polymerized composites (Rebilda DC/RDC, VOCO) micro-cylinders (1.2 mm diameter × 1 mm height) were built-up over each dentin disc, after being pre-heated at each temperature. After storage (48 h/37 °C), µSBS testing was run at a crosshead speed of 1 mm/min. DC% of FBU/RDC was evaluated at each temperature after 48 h using FTIR. Hourglass-shaped specimens were fabricated from both materials at each respective temperature and pulled apart to evaluate UTS after 48 h storage. Data were analyzed by ANOVA/Tukey’s test/Pearson’s correlation (p = 0.05). Neither adhesive/composite temperature nor their interaction had a significant effect on µSBS. No significant difference in µSBS between groups, except within 40 °C FBU. Predominant failure mode was a mixed type. No significant difference in DC% of FBU groups. RDC at 40 °C had significantly higher DC% than 25 °C. No significant difference in UTS of FBU and RDC groups. Application of both dual-polymerized adhesive and resin composite at 40 °C seemed to reduce µSBS. Raising the temperature to 40 °C improved DC% of resin composite, with no effect on adhesive. Pre-heating did not influence the UTS of both materials.
Acknowledgment
The authors would like to acknowledge VOCO Germany for supplying the materials evaluated in this study.
Disclosure statement
No potential conflict of interest was reported by the author(s).