34
Views
23
CrossRef citations to date
0
Altmetric
Original Articles

CORRELATION BETWEEN INTERFACIAL TENSIONS AND MICELLAR STRUCTURES

&
Pages 459-492 | Published online: 27 Apr 2007
 

Abstract

It is shown that results of surface and interfacial tension measurements can be used to predict the type of micelles and of liquid crystalline phases which are formed in binary and ternary surfactant solutions. In particular it is possible to predict the position of l.c. cubic phases in ternary systems consisting of surfactant, hydrocarbon and water. Data to demonstrate the conclusions were obtained on the surfactants Alkyltrimethylammoniumbromides, Alkyldimethylaminoxides and Alkyldimethylphosphinoxides. It was found that the interfacial tension of a dilute micellar solution against a reference hydrocarbon is a most sensitive and indicative parameter for the prediction of the different structures. Large changes of the interfacial tension were observed for the three systems having the same hydrocarbon chainlength. The value of the interfacial tension directly reflects also the amount of hydrocarbon which can be solubilized in the micellar solution. Interfacial tensions larger than 1mN/m are indicative of globular micelles while interfacial tensions between 0.1 and 1 mN/m indicate the formation of rods. Values below 0.1 mN/m indicate disclike micelles or lamellar phases.

The interfacial tension depends somewhat on the kind of hydrocarbon which is used for the measurements. It is observed that for several surfactant solutions the interfacial tension passes through a shallow minimum when the chainlength of the hydrocarbon is increased from six to sixteen.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.