The biomechanical difference between running with traditional and 3D printed orthoses

ABSTRACT

Running-related injuries have been associated with excessive foot pronation and high vertical loading rates. Traditional plaster-molded (TPM) foot orthoses are commonly prescribed to minimize these atypical biomechanical patterns. Recently, 3D printed (3DP) orthoses have become popular, yet the functional difference between these two types of orthoses remains unknown. Therefore, this study compared running biomechanics and perceived comfort during treadmill running in three orthotic conditions: 3DP orthoses, TPM orthoses, and a no-orthoses control condition (CON). Thirteen female asymptomatic runners with excessive foot pronation were recruited. Rearfoot eversion angle and velocity (at initial contact and peak) during stance, vertical loading rates, and perceived comfort were compared. Results showed lower peak rearfoot eversion angles during running with TPM (p=0.001, d=0.38) or 3DP orthoses (p=0.002, d=0.24) than CON. No differences were observed in other biomechanical parameters among the three conditions (p>0.05). Running with TPM (p≤0.001, d=1.74–1.82) and 3DP orthoses (p<0.003, d=1.06–1.34) resulted in better perceived comfort in “medial-lateral control” and “heel cushioning” than CON. There were no statistical differences in all parameters between TPM and 3DP orthoses. The present findings indicate improved comfort during running with TPM or 3DP orthoses, which hinted 3DP orthoses could be a viable alternative to TPM orthoses for clinical practice.

KEYWORDS:

• Orthotics
• foot pronation
• Kinematics
• Kinetics
• Perceived comfort

Disclosure statement

No potential conflict of interest was reported by the authors.