Migration of surrogate contaminants in paper and paperboard into water through polyethylene coating layer

Abstract

The migration of five surrogate contaminants, anthracene, benzophenone, dimethyl phthalate, methyl stearate and pentachlorophenol, from paper and paperboard into water through a polyethylene (PE) coating layer was investigated. Virgin paper and paperboard coated with PE films of 0.012 and 0.030mm thickness were spiked evenly with standard 1-ml solutions containing 5mg of each surrogate. The spiked papers were placed in contact with the PE coating layer at 10 and 24°C for 21 days. The resulting surrogate migration through the PE layer into 100ml water was measured by an analytical method developed here that used gas chromatography equipped with a flame ionization detector. Non-polar surrogates of anthracene and methyl stearate did not show any significant migration. In the case of the thin layer coating of 0.012mm, polar water-soluble contaminants of benzophenone, dimethyl phthalate and pentachlorophenol showed an equilibrated or maximized migration after 1 day, even at a refrigerated temperature of 10 °C. A thick PE coating of 0.030mm thickness delayed the progress of contaminant migration, which was also slower at lower temperature. Our results indicate that polyethylene coatings should not be seen as a complete barrier against possible contaminants in paper packaging materials under chilled or ambient conditions. Several variables such as coating thickness, temperature and suspected contaminants need to be considered to control the possible contamination risk from recycled or printed paper.

Keywords:

• Migration
• Contaminant Surrogates
• Pe
• Coating
• Paper
• Gc-FID Analysis