Milling and Classification of Printed Circuit Boards for Material Recycling

Abstract

Recycling of waste electric and electronic equipment (WEEE) is an emerging issue due to its hazardous nature. It is important to identify an appropriate environment-friendly process to recover the valuables and for safe disposal. The present work deals with the two-stage crushing process followed by a circulating air classifier for the separation of metals and nonmetals from the printed circuit boards (PCB). The two-stage crushing process is deployed to liberate the valuables for an appropriate progeny size distribution. The metal content decreases as the particle size decreases below 0.5 mm. However, it increases metal content above 500 µm up to 1,800 µm. It is concluded that the metals primarily enriched in the size range of −1.8 + 0.5 mm. The amount of metals and plastics present in each fraction is estimated. Among the classifier parameters, air flow velocity played a dominant role in metal enrichment. The material feed rate and rotating guide vane angle have no a significant effect on the enrichment of metals and nonmetals. The air flow velocity found was to be one of the crucial parameters for enrichment of metals. The superficial air flow velocity is optimized for efficient separation of metals and nonmetals of PCBs.

Keywords:

• air classification
• crushing
• printed circuit boards
• recycling
• waste treatment

Acknowledgments

The authors wish to thank Director, CSIR-Institute of Minerals and Materials Technology, for giving permission to publish this work.