Electrospray Dense Suspensions of TiO₂ Nanoparticles for Dye Sensitized Solar Cells

Abstract

We report the feasibility of using electrospray to atomize dense suspension of nanoparticles with high solid concentrations. We demonstrate this principle through electrospraying dense suspensions of TiO₂ nanoparticles with 40 wt.% in ethylene glycol. A dye sensitized solar cell (DSSC) is fabricated by electrospray deposition and the power conversion efficiency up to 6.81% is demonstrated. This simple, one-step process can fabricate the active layer with uniform thickness and multiple length scales, including 25 nm TiO₂ nanoparticles, ∼2 μm micro spherical particles, and ∼20-μm-thick film. A judicious choice of drying temperature is important to ensure complete drying of suspension droplets while avoiding creation of hollow particles, because the hollow particles exhibit significantly lower carrier mobility and short circuit current. The very high solid concentration demonstrated in this work can potentially reduce the manufacturing cost of DSSC because less energy will be wasted on evaporating and/or recycling the organic solvent. In addition, because electrospray is compatible with roll-to-roll process and the yield is scalable through multiplexed electrosprays, the electrospray route is a promising and economically competitive approach for manufacturing DSSCs through spray deposition.

Copyright 2013 American Association for Aerosol Research