465
Views
6
CrossRef citations to date
0
Altmetric
Original Articles

Electrodynamic Focusing of Charged Aerosol Particles

, &
Pages 389-405 | Received 16 Jun 1988, Accepted 18 Dec 1989, Published online: 08 Jun 2007
 

Abstract

An electrodynamic screen for focusing charged particles carried by an airflow stream has been constructed and tested. The screen has the shape of a cone frustum with half-angle of 8° and is 17 cm long. Entrance and exit diameters are 7.0 and 2.5 cm, respectively. Electrodes forming the screen are three 0.71-mm diameter stainless-steel wires configured as a triple-start helix with 2.0-mm pitch. A three-phase power supply drives each wire with a line-to-ground voltage of 2300 V at 350 Hz with a phase difference of 120° between adjacent wires. Test particles of 5.2-μm aerodynamic diameter with electric charge of 1850–6080 elementary units per particle in an aerosol having a mean flow velocity of 4.3×10−2 m/s parallel to the vertically oriented cone axis are confined and focused with essentially no particle loss. Minimum distance of approach of the test particles to the screen, as found from computer simulation of particle trajectories, solution of the particle equations of motion by linear approximation, and experimental observation, are in good agreement.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.