![Sample our Environment & Agriculture journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5934/TOC-Subject-Sample-2021-Environment-Agriculture.jpg"})
Abstract
Variation in the growth ring width, basic density, longitudinal shrinkage and tracheid length was investigated in the juvenile wood of Norway spruce samples taken from different heights in the stem. Annual height increments were cut from the ten youngest shoots from trees of three different heights. By this method the properties of an individual growth ring could be analysed without taking samples from each ring. Sixteen tree tops of an average stem height of 8, 15 and 25 m were analysed. Basic density was low in the first shoot, highest in the second or third one and decreased gradually thereafter. Longitudinal shrinkage was highest close to the pith and decreased to about 0.2% in the outer rings. Tracheids were only ca. 1 mm long close to the pith and their length increased sharply towards the tenth shoot. The properties of juvenile wood varied with the height in the stem. Longitudinal shrinkage around the pith seemed to increase with increasing height and basic density was highest at 25 m stem height. The applicability of the method for the calculation of basic density and tracheid length in individual growth rings close to the pith is discussed.
