44
Views
0
CrossRef citations to date
0
Altmetric
Original Article

Holmium: Yag Laser Angioplasty

Experimental ablation of vascular tissue via flexible ring catheters

, , , , &
Pages 538-541 | Accepted 13 May 1992, Published online: 04 Jan 2010
 

Abstract

This experimental study was designed to define the potential value of a mid-infrared holmium laser in the free running mode for angioplasty. Immediately after removal, fresh normal and diseased human cadaveric arteries were irradiated under saline with a Ho:YAG laser (wavelength 2.13 μm). The laser was pulsed at 3 Hz, 250 μs pulse width and fluences of 10 to 40 J/cm2. The laser beam was coupled to ring catheters with multiple low-OH quartz fibers. The tip of the delivery device was held in direct contact with the vessel surface with the laser beam oriented perpendicularly. Ablation of atherosclerotic plaque was accomplished at an ablation threshold of 10 J/cm2. The ablation rate was 2.1 to 8.3 μm/pulse. Removal of calcified plaque was only partially effective. There were marked thermal effects with vacuolizations extending up to 1505 ± 178 μm into the adjacent tissue. Laser light at the mid-infrared wavelength of 2.13 μm is supposed to be attractive as it is readily absorbed in water and can easily be transmitted through optical fibers. However, Q-switching seems to be essential to minimize thermal side effects and to make effective ablation of calcium possible.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.