Particle Size Determination of Trace Elements in Urban Air

Abstract

Airborne urban particulate matter was collected and fractionated according to size by cascade impactors. The elements zinc, cadmium, copper and lead on each size fraction were analyzed by anodic stripping voltammetry. The elements aluminum, iron, manganese, calcium and magnesium were analyzed by atomic absorption spectrophotometry. The data showed three different classes of particle size distribution for these nine elements. Lead and cadmium belonged to the first class with more than 70 % of the total collected element associated with particles having aerodynamic diameters below 0.5 micron. The calculated average mass median equivalent diameter (MMD) of cadmium and lead was approx. 0.1 micron. In the second class about 60% of the elements Zn, Cu, Mg and Fe was associated with particles smaller than 0.5 micron. The average MMD's for these elements were between 0.3 and 0.4 micron. For the elements Al, Ca and Mn about 50% of the metal was associated with particles smaller than 0.5 micron and the MMD's were between 0.5 and 0.6 micron. Examination of elemental ratios (using Al as a reference element) showed that Pb and Cd were about 1000 times more concentrated in atmospheric particulate matter than in average crustal material and that in general the Pb/Al and Cd/Al ratios are inversely proportional to particle size. The Zn/Al and Cu/Al ratios of atmospheric partides were age or less independent of particle size and approx. 20 times higher than these same ratios in average crustal material. The ratios Fe/Al, Mn/AI, Ca/M and Mg/AI in all sizes of particulate matter were essentially identical to the same ratios in average crustal material.