![Sample our Engineering & Technology journals, sign in here to start your access, latest two full volumes FREE to you for 14 days]({"type":"image" , "src" : "/sda/5933/TOC-Subject-Sample-2021-Engineering-Tech.jpg"})
The pressure distributions generated along vertical hydrodynamic herringbone-grooved journal bearings were experimentally and numerically investigated at rotational speeds ranging from 203 to 2110 rpm. A test rig was designed and constructed for this purpose and four journals (shafts) with different herringbone-grooved patterns and radial gaps were tested: Journal 1 (with symmetrical and discontinuous grooves and 0.25-mm clearance gap), Journal 2 (with symmetrical and discontinuous grooves and 0.35-mm clearance gap), Journal 3 (with symmetrical and four continuous grooves), and Journal 4 (with asymmetrical and three continuous grooves). The journals were made of aluminum with diameters of 46.00 mm, and the sleeve was made of a transparent Plexiglas pipe for visual observation of the lubricant in the gap between the journal and the sleeve. Pressure taps were installed along the sleeve to obtain the pressure distributions using a pressure transducer. Numerical simulations were performed for these four herringbone-grooved journal bearings using commercially available computational fluid dynamic software. The computational simulations agree in trends with the experimental results and theoretical expectations.
Review led by Greg Kostrzewsky
Notes
Review led by Greg Kostrzewsky