Infrared Emission Spectrophotometric Study of the Changes Produced by TiN Coating of Metal Surfaces in an Operating EHD Contact

Abstract

Infrared emission spectra and related measurements were obtained from an operating ball/plate EHD sliding contact under a variety of operating conditions. In order to be able to compare the effect of the ball surface, some of the steel balls were coated with a thin layer of titanium nitride (TiN) by vapor deposition. Polyphenyl ether (5P4E) was used as the lubricant and 1 percent of 1,1,2-trichloroethane (TCE) as an additive with a high affinity for steel but a low affinity for TiN. TiN is chemically inert, but its thermal conductivity is lower than that of steel. Therefore, the overall temperatures with TiN-coated balls were higher. Nevertheless, no scuffing was observed with the coated balls under conditions giving rise to scuffing with the uncoated balls. Tractions were lower with the TiN-coated balls and with the steel balls when TCE was added to the 5P4E. These findings were found to be inversely related to the degree of polarization of the spectral emission bands. The intensity and the dichroism of these bands were related to shear rates and inlet conditions of the EHD contact.

Presented as an American Society of Lubrication Engineers paper at the ASME/ASLE Lubrication Conference in Washington, D.C., October 5–7, 1982

Notes

Presented as an American Society of Lubrication Engineers paper at the ASME/ASLE Lubrication Conference in Washington, D.C., October 5–7, 1982