Traction Forces at Solid-Lubricated Rolling/Sliding Contacts

Abstract

A single-element traction rig was used to measure the traction forces at a solid-lubricated contact of a ball against a flat disk at room temperature under combine rolling and sliding. The load and speed conditions were selected to match those anticipated for bearing applications in adiabatic diesel engines. Traction vs slide/roll ratio curves were similar to those for liquid lubricants but the traction forces were an order of magnitude higher. The test data were used to derive equations to predict traction force as a function of contact stress and rolling speed. The data showed that the magnitude of traction forces were almost the same for all the lubricants tested. The lubricants, should, therefore, be selected on the basis of their ability to limit the wear of contact surfaces.

Presented at the 40th Annual Meeting in Las Vegas, Nevada May 6–9, 1985

Notes

Presented at the 40th Annual Meeting in Las Vegas, Nevada May 6–9, 1985