Modeling through Drying of Tissue—Effect of Pore Size Distribution on Drying Characteristics

Abstract

A general model for through drying of tissue was developed based on the equations of continuity in combination with correlations for heat and mass transfer. The model incorporates different geometric descriptions together with corresponding heat and mass transfer correlations for flow through cylindrical conduits and flow through packed beds of cylindrical fibers. At low intensities, i.e., at low airflow rates and low drying air temperatures, the model shows very good agreement with experimental data found in the literature and accurately predicts a period of constant drying rate due to saturation of the drying air. However, at higher drying intensities, the model predicts drying rates that are generally higher than what is found in experimental studies described in the literature. The model also predicts a period of constant drying rate that has not been observed in experiments at higher drying intensities. To illustrate the effect of nonuniform pore size distribution on the average drying rate, a model including a variable pore size distribution was developed. The results show that the early onset of the falling rate period in through drying at higher intensities could be explained by channelling effects caused by a nonuniform pore size distribution.

Keywords:

• Paper
• Pore size distribution
• Drying rate

ACKNOWLEDGEMENTS

The authors gratefully acknowledge the Swedish Gas Technology Center, the Swedish Energy Agency, the Center for Chemical Process Design and Control, Metso Paper, and SCA for the financial support.