Conditions for Accurate CFD Modeling of Spray-Drying Process

Abstract

The paper presents concluding results of extensive experimental and theoretical research on confident CFD modeling of spray drying. An earlier developed experimental method to determine spray-drying kinetics in a lab scale allowed us to find a critical material moisture content and to determine generalized spray-drying curves. The generalized drying curves, identical in shape in the laboratory and pilot plant units, were used in the CFD model of spray drying process. Extensive simulations for spray drying of 10, 30, and 50% of initial solid content of maltodextrin proved high accuracy of the predictions of discrete (particle size distribution, particle moisture content, particle velocity, spray temperature) and continuous-phase parameters (gas temperature and humidity). Maximum error of the predictions of discrete-phase parameters was on the level of 20%, which is probably close to the current capacity of the CFD technique for modeling of spray-drying process. Comparison of experimental measurements and theoretical results shows that incorporation of realistic spray-drying kinetics into the CFD model and correct definition of initial drying and atomization parameters enable reliable simulations of spray-drying process.

Keywords:

• Confident CFD simulations
• Critical moisture content
• Generalized drying curves
• Spray-drying kinetics